Huawei Echolife HG520b

15
3.7 Configuring the Wireless Mode
In the Wireless mode, the HG520b makes you access the Internet
without connecting a cable.
This section describes the process to configure the HG520b to work in
the Wireless mode and the process to configure your computer to
access the Internet through the HG520b.
3.7.1 Preparation
Table 3-5 shows the configuration for the Wireless mode.
Table 3-5 Configuration for the Wireless mode
Name Configuration
Acess Point Enable
Authentication Type
There are three types:
z WEP
z WPA-PSK
z WPA2-PSK
WPA Encryption
There are two types (found in the
authentication type of
WPA-PSK/WPA2-PSK):
z TKIP
z AES
802.11b/g
There are three types:
z 802.11b
z 802.11g
z 802.11b/g
3.7.2 Steps
Follow the steps described below:
(1) Log in to the Web configuration page. For the procedure,
refer to "
2.3 Establishing Configuration Environment."