18
configured by default. You can change the administrator password,
follow the steps:
(1) Log in to the Web configuration page of the HG520b. For the
procedure, refer to "
2.3 Establishing Configuration
Environment."
(2) Select Tools > System Management in the navigation tree
to display the Account configuration page.
(3) Click the corresponding editing icon to display the password
configuration page.
(4) Enter the default password in Old password, and then enter
the new password in New Password and Retype to
confirm.
(5) Click Submit.
4.3 Restoring the Default Factory Settings
Caution:
When you restore the default factory settings, the custom data may be
lost.
There are two options to restore default factory settings:
1. Using the Reset button
Follow the steps:
(1) Find the Reset button in the panel of the HG520b
(2) Use a pin to press the Reset button and then release it after
6 seconds.
To Next Page
Loading...
Need help?
General