5
2 Setting Network-Access Parameters
2.1 Logging In to Web-based Configuration
Utility
The HG533 provides an easy-to-use web-based configuration utility. You
can view and set the parameters of the HG533 through this utility. The
following example uses a computer running the Windows XP operating
system to describe how to log in to the web-based configuration utility:
Step 1 Set the network connection of your PC and ensure that your PC
obtains an IP address automatically, do as follows:
1. Choose Start > All Programs > Accessories >
Communications > Network Connections.
2. In the Network Connections window, right-click the working
Local Area Connection and choose Properties.
3. In the This connection uses the following items group box of
the Local Area Connection Properties dialog box, select
Internet Protocol (TCP/IP). Click Properties.
4. Ensure that your PC select Obtain an IP address automatically.
By default, the DHCP function of the HG533 is enabled. In this case,
the HG533 assigns an IP address to your PC automatically and you
do not need to configure the IP address of your PC.
Step 2 Start the Internet Explorer on your PC and ensure that the Internet
Explorer does not use any proxy server.
Take the Internet Explorer 6.0 as an example. To ensure that the
Internet Explorer does not use any proxy server, do as follows:
1. Start the Internet Explorer. Choose Tools > Internet Options.
2. On the Connections tab of the Internet Options dialog box, click
LAN Settings.
3. In the Proxy Server area, ensure that Use the proxy server for
your LAN is cleared. If Use the proxy server for your LAN is
To Next Page
Loading...
Need help?
General