Huawei HG533

2
1. Power adapter 2. Desktop Computer 3. Telephone
4. Splitter 5. Telephone wall jack 6. Laptop Computer
a. MODEM interface b. PHONE interface c. LINE interface
1.1.2 Getting started
After connecting the cables, press the On/Off button on the side panel to
power on the HG533.
The ADSL indicator lights up and starts blinking. This indicates that the
ADSL port activation is in progress. The blinking may last less than 3
minutes. When the ADSL indicator stops blinking and remains on, the
HG533 is working properly.
1.2 Connecting Cables Using the WAN
Interface
1.2.1 Connecting the Cables
If there is at least one available network wall jack in your home, you can go
online using the Ethernet service.
1
2
3
4
b
5
a
1.
Power adapter 2.
Telephone 3.
Wall jack
4.
Desktop Computer 5.
Laptop Computer
a.
Ethernet wall jack b.
Telephone wall jack