Huawei HG533

3
1.2.2 Getting Started
After connecting the cables, press the On/Off button on the side panel to
power on the HG533.
The WAN indicator light turns on. This indicates that the HG533 is working
properly. When the WAN indicator light starts blinking, data is being
transmitted between the HG533 and the connected device.
1.3 Connecting Cables Using the USB
Interface
1.3.1 Connecting the Cables
If there are no available telephone or network jacks in your home, you can
go online using the data card service.
1
2
3
4
1.
Power adapter
2. Desktop Computer
3.
Data card
4. Laptop Computer