3.2 Connecting the USB Interface
The USB interface is on the top of the HG552d. Portable storage devices, such as USB
flash drives and portable hard disks, can be connected to the USB interface. For the
connection method, please see the following figure.
Figure 3-2 Connecting the USB Interface
3.3 Getting Started
To power on the HG552d, press the ON/OFF button on the side panel of the HG552d.
After you power on the HG552d, the DSL indicator blinks (for less than three minutes),
which indicates that the HG552d is being activated. Later, the DSL indicator turns solid
on. The POWER indicator is also solid on, which indicates that the HG552d is working
properly.
To Next Page
Loading...
