5 Wireless Services
If a wireless network adapter is installed on your computer, you can connect your
computer to the HG552d through a wireless connection.
There are two methods to configure the wireless network connection.
5.1 Configuring the Wireless Connection by the Web
Page
To configure the wireless network connection by configuring the web page, do as
follows:
Step 1 Set the wireless network name and access password of the HG552d (taking the
authentication type WPA-PSK as an example):
1. Log in to the Web-based configuration utility.
2. In the navigation tree on the left, choose Basic > WLAN.
3. Ensure select the Enable WLAN option button.
4. Enter a wireless network name in the SSID text box.
5. Select WPA-PSK from the Security Mode drop-down combo box.
6. Enter an access password in the WPA pre-shared Key text box.
7. Select TKIP from the WPA Encryption drop-down combo box, and keep the
default settings of other parameters.
8. Click Submit to save the settings.
Step 2 Enable the wireless configuration service provided by Windows XP.
1. Right-click My Computer, and then choose Manage from the shortcut menu.
2. In the Computer Management window, choose Computer Management
(Local) > Services and Applications >Services.
3. From the services listed in the right pane of the Computer Management window,
right-click Wireless Zero Configuration, and then choose Properties from the
shortcut menu.
4. In the Wireless Zero Configuration Properties (Local Computer) dialog box,
check whether Service status is Started. If not, click Start.
5. Click OK to close the dialog box, and then close the Computer Management
window.
Step 3 Configure the wireless network connection on your computer (taking the Windows XP
operating system as an example):
1. Choose Start > All Programs > Accessories > Communications > Network
Connections.
To Next Page
Loading...
Need help?
General