Huawei Iris Hellas SUN2000 Series - Installation; Checking Before Installation

4 Installation
4.1 Checking Before Installation
Outer Packing Materials
Before unpacking the inverter, check the outer packing materials for damage, such
as holes and cracks, and check the inverter model. If any damage is found or the
inverter model is not what you requested, do not unpack the package and contact
your supplier as soon as possible.
Figure 4-1 Position of the inverter model label
(1) Position of the model label
NO TE
You are advised to remove the packing materials within 24 hours before installing the
inverter.
Package Contents
After unpacking the inverter, check that the contents are intact and complete. If
any damage is found or any component is missing, contact your supplier.
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1
User Manual
4 Installation
Issue 05 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 19