Need help?Do you have a question about the Huawei iSitePower-M V100R002C00 and is the answer not in the manual?
General| Model | iSitePower-M V100R002C00 |
|---|---|
| Category | Inverter |
| Output Frequency | 50/60 Hz |
| Cooling Method | Natural Convection |
| Storage Temperature | -40°C to +70°C |
| Protection Features | Overload, Short Circuit |
Describes the iSitePower-M system's overview, installation, commissioning, maintenance, and technical specifications.
Lists the professionals for whom this document is intended.
Defines symbols used in the guide for safety and information.
General safety instructions for installing, operating, and maintaining the equipment.
Details qualifications and training needed for personnel handling the equipment.
Covers grounding requirements and general electrical safety practices.
Safety precautions for DC power connection and cable routing.
Precautions regarding electrostatic discharge and wearing ESD gloves.
Critical safety guidelines for handling, storing, and using batteries to prevent hazards.
Basic requirements and personal safety for battery operations.
Requirements for safely installing battery modules, checking packaging, and securing connections.
Information on battery hazards and emergency procedures for leaks or fires.
Procedures for battery leakage, dropped batteries, flood, and recycling.
Guidelines for storing batteries, including environmental conditions and handling.
Regulations and precautions for transporting dangerous goods like batteries.
Specifies suitable environments and conditions for installing the battery.
Safety precautions when using ladders, drilling holes, and moving heavy objects.
Safety considerations for commissioning and performing maintenance.
Describes the function and working modes of the iSitePower-M system.
Illustrates the external appearance of the system components and LEDs.
Details the networking diagram and system configurations.
Explains the meaning and purpose of various labels on the equipment.
Describes the function and structure of the power module.
Details the specifications and appearance of the battery module.
Describes the AC parallel box used for increasing system power.
Describes the system's operation in a solar-only environment.
Explains system operation when connected to the power grid.
Outlines system operation with genset and grid power sources.
Describes system operation combining solar and grid power.
Details system operation with solar, battery, and genset.
Explains system operation with all three power sources.
Steps to check outer packing and deliverables before installation.
Lists necessary tools and instruments for installation.
Guidelines for selecting an appropriate installation location.
Procedures for ground and wall mounting brackets.
Steps for installing battery and power modules.
Instructions for adding battery modules for increased capacity.
Procedure for installing an AC parallel box for system expansion.
Lists the types of cables included with the iSitePower-M system.
Specifies cable requirements for different scenarios (Solar-Only, Grid, etc.).
Safety warnings and general precautions for electrical connections.
Instructions for electrical connections in a solar-only setup.
Electrical connection procedures for grid-connected systems.
Electrical connection steps for systems with genset and grid.
Electrical connection details for solar and grid hybrid systems.
Electrical connection procedures for solar and genset hybrid systems.
Electrical connection for systems with all three power sources.
Guidelines for connecting cables during capacity expansion.
Steps to power on the system after installation.
Procedures for commissioning the battery system, including app installation.
Procedures and precautions for safely powering off the system.
Checklist and intervals for performing routine system maintenance.
Common alarms, their causes, and suggested troubleshooting steps.
Guidelines for storing batteries and procedures for inspection and recharge.
Managing battery storage with low state of charge to prevent damage.
FAQs on uneven ground, PV cable tools, special cables, and power terminals.
FAQs on power-on, SOC changes, upgrade issues, WiFi, and battery capacity querying.
FAQs on general problem handling and resetting passwords.
Environmental and electrical specifications for the iSitePower-M system.
Physical dimensions and mounting details for the power module.
Physical dimensions and mounting details for the battery module.
Technical details for the optional AC parallel box.
Step-by-step guide for preparing a cord end terminal.
Instructions for preparing an OT terminal, including crimping and sealing.
Detailed steps for preparing PV input power cables with specific connectors.
Defines cable stripping lengths for standard and parallel scenarios.
To Next Page