Huawei iSitePower-M V100R002C00 - Determining the Installation Position

Type Tools and Instruments
Work shoes
- -
5.1.3 Determining the Installation Position
Basic Requirements
● Do not install the product in a position where it is easy to touch because the
temperature of the chassis and heat dissipater is high when it is running.
● Do not install the product in areas with
ammable or explosive materials.
● Do not install the product outdoors in salt areas because it may corrode and
cause
res. A salt area refers to the region within 500 m from the coast or
prone to sea breeze. The regions prone to sea breeze vary with weather
conditions (such as typhoons and monsoons) or terrains (such as dams and
hills).
● Do not install the product in a position where children can touch it.
Installation Angle Requirement
The product can be ground-mounted and wall-mounted. The installation angle
requirement is as follow:
● Do not install the product at forward tilted, back tilted, side tilted, horizontal,
or upside down positions.
Requirements for the Wall and Ground
● Concrete walls and brick walls are recommended. Do not use sandwich panel
or wooden walls.
● The bearing capacity of the ground must be greater than or equal to 500
kg/m
2
.
Installation Dimensions
Reserve
sucient clearance around the product for installation and heat
dissipation.
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1) 5 System Installation
Issue 01 (2022-07-15) Copyright © Huawei Technologies Co., Ltd. 48