EasyManua.ls Logo

Huawei iSitePower-M V100R002C00 - Mechanical Safety

Huawei iSitePower-M V100R002C00
197 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Figure 1-1 Installation environment
NO TE
The operation and service life of the battery depend on the operating temperature.
Install the battery at a temperature equal to the ambient temperature or in a better
environment.
1.8 Mechanical Safety
Using Ladders
Use wooden or berglass ladders when you need to perform live working at
heights.
When a step ladder is used, ensure that the pull ropes are secured and the
ladder is held
rm.
Before using a ladder, check that it is intact and conrm its load bearing
capacity. Do not overload it.
Ensure that the wider end of the ladder is at the bottom, or protective
measures have been taken at the bottom to prevent the ladder from sliding,
Ensure that the ladder is securely positioned. The recommended angle for a
ladder against the
oor is 75 degrees, as shown in the following gure. An
angle rule can be used to measure the angle.
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1) 1 Safety Precautions
Issue 01 (2022-07-15) Copyright © Huawei Technologies Co., Ltd. 14

Table of Contents

Related product manuals