Huawei iSitePower-M V100R002C00 - Install the AC Output Power Cable

Figure 8-5 Installing the PV input power cables
----End
8.1.4 Install the AC Output Power Cable
CA UTION
● Do not reversely connect or short-circuit the live wire and neutral wire of an AC
power cable.
● The PE wire of an AC power cable must be grounded.
● Do not reversely connect AC output power cables.
NO TICE
A leakage protection device must be congured for the AC output of the system.
The leakage current must be 30 mA. You need to
congure and install the device
by yourself.
NO TE
In a single-node system, connect the other end of the AC output power cable to a PDB. In a
parallel system, connect the other end of the AC output power cable to the AC parallel box.
Procedure
Step 1 Connect AC power cables to the terminal connectors.
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1) 8 Electrical Connection
Issue 01 (2022-07-15) Copyright © Huawei Technologies Co., Ltd. 78