Huawei iSitePower-M V100R002C00 - Battery Handling and Environment

Basic Requirements
D ANGER
● Do not expose batteries at high temperatures or around heat-generating
sources, such as sunlight,
re sources, transformers, and heaters. The battery
may cause a re if overheated.
● To avoid leakage, overheating, or re, do not disassemble, alter, or damage
batteries. For example, do not insert foreign objects into batteries or place
batteries in water or other liquids.
● The
re hazard of the lithium-ion/sodium-ion battery energy storage system is
high. Consider the following safety risks before handling batteries:
● Battery electrolyte is combustible, toxic, and volatile.
● Battery thermal runaway can generate ammable gas and harmful gas
such as CO and HF.
● The concentration of
ammable gas generated from battery thermal
runaway may cause deagration and explosion.
● The batteries must be stored separately inside the packaging. Do not store
batteries together with other materials or in the open air. Do not stack
batteries too high.
● Do not use batteries beyond the warranty period.
● Do not remove the battery packaging before use. Batteries should be charged
during storage by professionals as required. Put batteries back to their
packaging after charge during storage.
● Move batteries in the correct direction. Do not place a battery upside down or
tilt it.
● Protect batteries from impact.
● Do not perform welding or grinding work around batteries to prevent re
caused by electric sparks or arcs.
● Use batteries within the temperature range specied in this manual.
● Do not use damaged batteries (such as damage caused when a battery is
dropped, bumped, or dented on the enclosure). Damaged batteries may
release ammable gases. Do not store damaged batteries near undamaged
products.
● Do not place damaged batteries in close proximity to ammable materials.
Do not approach the damaged batteries unless you are a professional.
● Monitor damaged batteries during storage for signs of smoke, ame,
electrolyte leakage, or heat.
Personal Safety
● Wear proper personal protective equipment (PPE) during operation. If there is
a probability of personal injury or equipment damage, immediately stop the
operations, report the case to the supervisor, and take feasible protective
measures.
● Use tools correctly to avoid hurting people or damaging the equipment.
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1) 1 Safety Precautions
Issue 01 (2022-07-15) Copyright © Huawei Technologies Co., Ltd. 7