Huawei Iris Hellas SUN2000 Series - Setting Feature Parameters

7.1.4.3 Setting Feature Parameters
Procedure
Step 1 ChooseFunction Menu > Settings > Feature Parameters to access the settings
screen.
Figure 7-9 Feature parameters (advanced user)
----End
Parameters
No. Parameter Description Remarks
1 MPPT multi-peak
scanning
When the inverter is used in
scenarios where PV strings are
greatly shaded, set this parameter
to Enable, and then the inverter
will perform MPPT scanning at
regular intervals to locate the
maximum power.
-
2 MPPT multi-peak
scan interval (min)
Species the MPPT scanning
interval.
This parameter is displayed
when MPPT multi-peak
scanning is set to Enable.
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1
User Manual
7 Man-Machine Interactions
Issue 05 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 60