● Move the inverter with the help of other three persons or using an appropriate
transportation tool.
● Do not place the inverter with its wiring terminals at the bottom contacting the
oor or any other objects because the terminals are not designed to bear the
weight of the inverter.
● When you need to temporally place the inverter on the ground, use foam,
paper, or other protection material to prevent damage to its cover.
● Do not lift or hoist the inverter using the bottom holes of the handles to
prevent the handles from cracking.
Figure 4-14 Lifting positions
Installing the Inverter
Step 1 Mount the inverter on the mounting bracket.
Step 2 Tighten the two screws at the bottom of the inverter.
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1
User Manual
4 Installation
Issue 05 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 29
To Next Page
Loading...
