Step 6 Install the new fan (FAN 1 is used as an example).
Figure 8-10 Installing a new fan
Step 7 Bind the fan cables.
● Binding positions for fan 1
Figure 8-11 Binding the FAN 1 cables
● Binding positions for fan 2
Figure 8-12 Binding the FAN 2 cables
● Binding positions for fan 3
Figure 8-13 Binding the FAN 3 cables
Step 8 Push the fan tray into the slot until the fan bae plate aligns with the inverter
chassis.
SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1
User Manual
8 Maintenance
Issue 05 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 88
To Next Page
Loading...
