Huawei iSitePower-M - Power-On Commissioning

29
4. Tighten the screws.
Overview
9
Power-On Commissioning
•
The product must be powered on within 24 hours after being unpacked. During
maintenance, the power-off time cannot exceed 24 hours.
•
Before the first power-on, press the manual ON/OFF switch.
Set the DC SWITCH of the power module and the AC input switch to ON. After the initial
installation and power-on, observe the indicators to check the running status.
Powering On the System
9.1
Indicator Status Description
Running
indicator
Steady on
in green
The power system is running properly.
Off
•
The power system is not running.
•
The power system is faulty.
•
The power system has no input current.
Steady on
in red
The power system is running properly,
but an alarm is generated.
WiFi
indicator
Off The WiFi function is abnormal.
Steady on
in green
The WiFi function is normal.
Annular
strip light
Steady on
in green
Indicates the battery capacity and that
the product is discharging.
Running
indicator
WiFi
indicator
Annular
strip light