Parameter Description Setting
Password Password of the user used for
communication authentication
between remote devices.
n If remote devices are OceanStor
18000 series V100R001C20, T
series V200R002C20, or
OceanStor V3 series
V300R001C10 or later, you need
to use the password of the
machine-machine user.
n If remote devices are OceanStor
18000 series V100R001C10, T
series V200R002C10, or
OceanStor V3 series
V300R001C00 or earlier, you need
to use the password of the super
administrator or administrator
account on the older version
remote device.
[Value]
n The default
password of the
machine-
machine user is
mm_user@stor
age.
NOTE
You are advised
to change your
login password
periodically in
the future by
executing the
change
mm_user
password
command. This
reduces the
password
leakage risks.
For details about
how to use the
command, see
the Command
Reference of the
corresponding
product model.
n The password of
the super
administrator or
administrator
account is
consistent with
the password on
the remote
device.
Step 6 Click Next. The information summary is displayed.
Step 7 Click Finish. The operation result is displayed. Perform the following operations based on the
number of links you want to add:
l To add only one link, click Close.
l To add another link for link redundancy, select Continue adding links and click Close.
The Add Link dialog box is displayed. Perform Step 8 as prompted.
NOTE
After the links are added, you can select the remote device from the remote device list. On the
navigation bar, click Add Link or right-click the device and choose Add Link to add other links.
Step 8 Optional: Perform the following operations based on Link Type:
OceanStor V3 Series
Remote Replication Feature Guide for Block
3 Configuring Remote Replication
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
To Next Page
Loading...
