3. Add a remote device in either the primary storage system at site A or the secondary
storage system at site B.
Add a remote device at one side to establish a usable link between two storage systems.
The following uses the primary storage system at site A as an example to describe how
to add a remote device. The procedure for the secondary storage system at site B is the
same.
On the navigation bar of DeviceManager, click
Data Protection and then Remote
Device. Choose Add Remote Device to add a remote device following the Add Remote
Device Wizard dialog box.
OceanStor V3 Series
Remote Replication Feature Guide for Block
4 Configuration Example
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
To Next Page
Loading...
