2. Add routes for iSCSI host ports of both the primary and secondary storage systems.
Perform this step when the host port on the primary storage system and that on the
secondary storage system use IP addresses in different network segments. If the host
ports use IP addresses in the same network segment, skip this step. The following uses
the primary storage system at site A as an example to describe how to add a route for a
host port. The procedure at site B is the same.
After modifying host port IP address, in Ethernet Ports, select the host port for which
you need to add routes. Click Route Management, and choose Add in the displayed
dialog box to add route information.
OceanStor V3 Series
Remote Replication Feature Guide for Block
4 Configuration Example
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
87
To Next Page
Loading...
