Huawei OptiX OSN 7500 - Table 10-21 Requirements for Mechanical Stress; Table 10-22 Climate Environment for Transportation

OptiX OSN 7500
Technical Manual - System Description 10 Technical Specifications
Huawei Technologies Proprietary
10-14
5. Mechanical Stress
Table 10-21 Requirements for mechanical stress
Item Sub-item Range
Shift ≤7.0 mm NA
Acceleration NA ≤20.0 m/s²
Sinusoidal vibration
Frequency range 2 Hz–9 Hz 9 Hz–200 Hz
Impact response
spectrum II
≤250 m/s² Non-steady impact
Static load ≤5 kPa
Note:
Impact response spectrum: The curve of the maximum acceleration response generated by
the equipment under the stipulated impact motivation. Impact response spectrum II indicates
the duration of semi sinusoidal impact spectrum is 6ms.
Static load: The pressure from upside, that the equipment with package can endure when the
equipment is piled as stipulated.
10.8.2 Environment for Transportation
1. Climate
Table 10-22 shows the climate environment required for transporting the OptiX OSN
7500.
Table 10-22 Climate environment for transportation
Item Range
Altitude ≤5000 m
Air pressure 70 kPa–106 kPa
Temperature
–40°C to +70°C
Temperature change rate
≤3°C/min
Relative humidity 10%–100%
Solar radiation ≤1120 W/s²
Heat radiation ≤600 W/s²