Huawei OptiX OSN 7500 - Table 10-24 Density for Chemical Active Substance; Table 10-25 Requirements for Mechanical Stress

OptiX OSN 7500
Technical Manual - System Description 10 Technical Specifications
Huawei Technologies Proprietary
10-16
(3) The density of the chemical active substances complies with the requirements
listed in Table 10-24.
Table 10-24 Density for chemical active substance
Chemical active substance Content
SO
2
≤0.30 mg/m³
H
2
S ≤0.10 mg/m³
NO
2
≤0.50 mg/m³
NH
3
≤1.00 mg/m³
Cl
2
≤0.10 mg/m³
HCl ≤0.10 mg/m³
HF ≤0.01 mg/m³
O
3
≤0.05 mg/m³
5. Mechanical Stress
Table 10-25 Requirements for mechanical stress
Item Sub-item Range
Shift ≤7.5 mm NA NA
Acceleration NA ≤20.0 m/s² ≤40.0 m/s²
Sinusoidal
vibration
Frequency range 2 Hz–9 Hz 9 Hz–200 Hz 200 Hz–500 Hz
Acceleration
spectral density
10 m²/s³ 3 m²/s³ 1 m²/s³ Random
vibration
Frequency range 2 Hz–9 Hz 9 Hz–200 Hz 200 Hz–500 Hz
Impact response
spectrum II
≤300 m/s² Non-steady
impact
Static load ≤10 kPa