OptiX OSN 7500
Technical Manual - System Description A Compliant Standards
Huawei Technologies Proprietary
A-2
Recommendation Description
G.784 Synchronous Digital Hierarchy (SDH) management
G.803 Architectures of transport networks based on the Synchronous
Digital Hierarchy (SDH)
G.813 Timing characteristics of SDH equipment slave clocks (SEC)
G.823 The control of jitter and wander within digital networks which are
based on the 2048 kbit/s hierarchy.
G.824 The control of jitter and wander within digital networks which are
based on the 1544 kbit/s hierarchy.
G.825 The control of jitter and wander within digital networks which are
based on the Synchronous Digital Hierarchy (SDH).
G.826 Error performance parameters and objectives for international,
cOSNtant bit rate digital paths at or above the primary rate.
G.831 Management capabilities of transport networks based on the
Synchronous Digital Hierarchy (SDH).
G.841 Types and characteristics of SDH network protection
architectures
G.842 Cooperation of the SDH network protection structures
G.958 Digital line systems based on the synchronous digital hierarchy
for use on optical fibre cables
Q.811 Lower layer protocol profiles for the Q3-interface
Q.812 Upper layer protocol profiles for the Q3-interface
M.3010 Principles for a telecommunication management network
G.661 Definition and test methods for the relevant generic parameters
of optical fibre amplifiers
G.662 Generic characteristics of optical fiber amplifier devices and
sub-systems
G.663 Application related aspects of optical fibre amplifier devices and
sub-systems
X.86 Ethernet over LAPS
G.7041 Generic framing procedure (GFP)
To Next Page
Loading...
