Huawei OptiX OSN 8800 - 4.2.3 Management Interfaces

OptiX OSN 8800/6800/3800
Hardware Description
4 OptiX OSN 8800 Subrack
Issue 01 (2016-03-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
Board
Slots for Active and Standby Boards
SCC
IU74 & IU85
STG
IU75 & IU86
SXM/SXH/USXH
IU10 & IU44
XCT/UXCT
IU9 & IU43
TN52AUX
Enhanced OptiX 8800 T64: IU72 & IU73, IU83 & IU84
4.2.3 Management Interfaces
The OptiX OSN 8800 T64 subrack provides various communication and maintenance
interfaces for the management and maintenance purposes, as shown in Table 4-1.
Table 4-1 Management interfaces
Boar
d
Front Panel
Interface
Specification
Name
Conne
ctor
Type
Pino
ut
Description
TN5
1EFI
2
EFI2
ETH1
ETH2 ETH3
LAMP1
LAMP2
NM_ETH1
NM_E
TH1/E
TH1/E
TH2/E
TH3:
networ
k
manag
ement
interfac
es
RJ45
Table
4-2
Table
4-3
NM_ETH1:

Connects the network
interface on the
equipment through a
network cable to that on
an NM server so that the
NM can manage the
equipment.

Connects the
NM_ETH1/NM_ETH2
network interface on one
NE through a network
cable to that on another
NE to achieve
communication between
NEs.
ETH1-ETH3:

Connects a network
cable from the
ETH1/ETH2/ETH3
interface on one subrack
to corresponding
interfaces on the other
subracks to achieve the
communication between
the master subrack and
slave subracks.

Dimensions
of front panel
(H x W x D):
80 mm (3.1
in.) x 50.8
mm (2.0 in.)
x 220 mm
(8.7 in.)

Weight: 0.3
kg (0.66 lb.)

Power
consumption:
Typical
power
consumption
(W): 13 W
Maximum
power
consumption
(W)
b
: 15 W