Huawei PowerCube 5000 - C Preparing Terminals

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
C Preparing Terminals
Issue 03 (2020-04-10)
Copyright © Huawei Technologies Co., Ltd.
95
C Preparing Terminals
This section describes how to prepare cord end terminals and OT terminals.
Cut a cable of a proper length and install an OT terminal or a cord end terminal.
Figure C-1 Preparing a cord end terminal
(1) Cable
(2) Cord end terminal
(3) Crimping tool
Figure C-2 Preparing an OT terminal
(1) Cable
(2) OT terminal
(3) Heat shrink tubing
(4) Hydraulic pliers
(5) Heat gun