Huawei PowerCube 5000 - Installing Control Cables Between ICC Cabinets

To Next Page

To Previous Page

PowerCube 5000 (SUN2000-150KTL-S0)

Installation Guide

9 Power-on and Commissioning

Issue 03 (2020-04-10)

Procedure

Step 1 Tap the start/stop button on the MDU main menu, or shut down the system on the WebUI to

disconnect the system output.

Step 2 Turn off the AC output switch, battery string switch, and isolation transformer disconnector.

Step 3 Turn off the solar input switch and AC input switch.

Step 4 The loads power off completely. The control panel and indicators turn off.

----End

9.7.2 Shutting Down and Powering Off a Parallel System

Prerequisites

Ensure that the output load is transferred or there is no major load so that system power-off is

allowed. Once the integrated equipment is shut down, there is no power output from the

output end.

Procedure

Step 1 Tap the start/stop button in the MDU main menu of a cabinet or shut down the system on the

WebUI to disconnect the system output.

Step 2 Turn off all AC output switches, battery string switches, and isolation transformer

disconnectors.

Step 3 Turn off the solar input switch and AC input switch.

Step 4 The loads power off completely. The control panel and indicators turn off.

----End

Other manuals for Huawei PowerCube 5000