PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 3-11 Installing an isolation transformer
The connecting plates between the isolation transformer and the SUN2000 are installed in the same way
as those between two SUN2000s.
Step 6 Install the waterproof panel on the top of the isolation transformer.
1. Remove the waterproof panel bracket.
Figure 3-12 Removing the waterproof panel bracket
2. Install the waterproof panel bracket on the top of the isolation transformer.
To Next Page
Loading...
