9 Disposal
9.1 Removing a Solar Inverter
Procedure
Step 1 Power
o the system.
Step 2 Disconnect all cables from the solar inverter, including the signal cable, DC input
power cables, AC output power cable, and PE cable.
Step 3 Remove the solar inverter from the mounting bracket.
Step 4 Remove the mounting bracket.
----End
9.2 Packing a Solar Inverter
● If the original packaging is available, put the solar inverter inside it and then
seal it using adhesive tape.
● If the original packaging is unavailable, put the solar inverter inside a suitable
hard carton and seal it properly.
9.3 Disposing of a Solar Inverter
If the solar inverter service life expires, dispose of it according to the local disposal
rules for electrical equipment and electronic component waste.
SUN2000-4.95KTL-JPL1
User Manual 9 Disposal
Issue 05 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. 94
To Next Page
Loading...
