Installation Environment Requirements
● Install the solar inverter in a well-ventilated environment for heat dissipation
● When installed under direct sunlight, performance derating may be initiated
due to additional temperature rise.
● To extend the service life of the solar inverter, install the solar inverter in a
sheltered place or install an awning over the solar inverter.
● The SUN2000 can be installed indoors or outdoors. Outdoor installation is
recommended to reduce noise.
Mounting Structure Requirements
● The mounting structure where the solar inverter is installed must be
re
resistant.
● Do not install the solar inverter on ammable building materials.
● Ensure that the installation surface is solid and can sustain the weight of
inverters.
● In residential areas, do not install the solar inverter on drywalls or walls made
of similar materials with a weak sound insulation performance because the
noise generated by the solar inverter may interfere with residents in the living
area.
Installation Angle Requirements
The solar inverter can be wall-mounted or pole-mounted. The installation angle
requirements are as follows:
● Install the solar inverter vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
● Do not install the solar inverter at forward tilted, excessive back tilted, side
tilted, horizontal, or upside down positions.
SUN2000-4.95KTL-JPL1
User Manual 4 Installation
Issue 05 (2023-02-17) Copyright © Huawei Technologies Co., Ltd. 26
To Next Page
Loading...
