Huawei SUN2000-5KTL-M1 - Page 105

Parameters Settings
On the home screen, choose Power adjustment > Battery control, and set the
battery parameters and working mode.
Figure 7-14 Battery control parameter setting
Parameter Description Value Range
Working mode For details, see the description
on the App screen.
● Maximum self-
consumption
● Time-of-use
● Fully fed to grid
Maximum charge
power (kW)
Retain this parameter to the
maximum charge power.
Additional conguration is not
required.
● Charge: [0,
Maximum charge
power]
Maximum discharge
power (kW)
Retain this parameter to the
maximum discharge power.
Additional conguration is not
required.
● Discharge: [0,
Maximum
discharge power]
End-of-charge SOC
(%)
Set the charge cuto capacity. 90%–100%
End-of-discharge
SOC (%)
Set the discharge cuto
capacity.
0%–20% (When no PV
module is congured
or the PV modules
have no voltage for 24
hours, the minimum
value is 15%.)
SUN2000-(3KTL-10KTL)-M1 Series
User Manual 7 Man-Machine Interaction
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 95