Huawei SUN2000-5KTL-M1 - Connecting the RS485 Communications Cable (Smart Power Sensor)

Figure 5-21 Installing the cable
Step 2 Connect the signal cable connector to the COM port.
Figure 5-22 Securing the signal cable connector
----End
5.8.2 Connecting the RS485 Communications Cable (Smart
Power Sensor)
Cable Connection
● The following gures show the cable connections between the inverter and
DTSU666-H and YDS60-C24 meters.
NO TE
The cable connections between the DTSU71 and DHSU1079-CT power meters and the
inverter are the same as those between the DTSU666-H power meter and the inverter.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual 5 Electrical Connections
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. 61