Huawei SUN2000-5KTL-M1 User Manual

Symbol Description
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
Notice is used to address practices not related to personal
injury.
Supplements the important information in the main text.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
Change History
Changes between document issues are cumulative. The latest document issue
contains all the changes made in earlier issues.
Issue 17 (2024-01-12)
● Updated 5.2 Installation Preparation.
● Updated 5.8.2 Connecting the RS485 Communications Cable (Smart Power
Sensor).
● Updated 8.3 Troubleshooting.
● Updated 10.1 SUN2000 Technical Specications10.1 SUN2000 Technical
Specications.
● Updated A Grid Code.
Issue 16 (2023-11-02)
Updated 5.4 Connecting the AC Output Power Cable.
Issue 15 (2023-09-30)
Updated 7.2.1.4 Capacity Control.
Issue 14 (2023-09-06)
Updated A Grid Code.
Issue 13 (2023-08-23)
Updated D Rapid Shutdown.
Issue 12 (2023-07-30)
● Updated About This Document.
● Updated 2.1 Product Introduction.
SUN2000-(3KTL-10KTL)-M1 Series
User Manual About This Document
Issue 17 (2024-01-12) Copyright © Huawei Technologies Co., Ltd. iv

Huawei SUN2000-5KTL-M1 Specifications

General

Max. Efficiency	98.4%
Rated AC Output Power	5000 W
Max. Apparent Power	5500 VA
Max. DC Input Voltage	1100 V
Number of MPPTs	2
Operating Temperature Range	-25°C to +60°C
Start Voltage	200 V
European Efficiency	97.8%
Protection Degree	IP65
Start-up Voltage	200 V
Output Voltage Range	180 V - 280 V
Frequency Range	50 Hz / 60 Hz
Power Factor	0.8 leading ... 0.8 lagging
THD	<3%
Cooling Method	Natural Convection
Max. DC Power	7500 W
Rated AC Voltage	230 V