Component Description Source
Power
meter
[3]
The SUN2000 can connect to the
DTSU666-H, DTSU666-HW, YDS60-80
and YDS60-C24 power meter.
Purchased from Huawei
Note [1]: To connect the SUN2000 to the SmartLogger1000 or
SmartLogger2000, contact the Company.
Note [2]: For details about Smart Dongle operations, see SDongleA-05 Smart
Dongle Quick Guide (WLAN-FE), SDongleA-03 Quick Guide (4G) and
SDongleB-06 Smart Dongle Quick Guide (4G).
Note [3]: For details about meter operations, see
DTSU666-HW Smart Power
Sensor Quick Guide
,
YDS60-80 Smart Power Sensor Quick Guide, YDS60-C24
Smart Power Sensor Quick Guide, DTSU666-H and DTSU666-H 250 A (50
mA) Smart Power Sensor Quick Guide
and
DTSU666-H 100 A and 250 A
Smart Power Sensor User Manual
.
RS485 communication
● SmartLogger networking
The SUN2000 can connect to the SmartLogger over RS485, and the
SmartLogger can be connected to PC. You can query the information about
the SUN2000, such as energy yield, alarms, and running status using the
SUN2000 app, SmartLogger, embedded WebUI, or the network management
software (such as the NetEco) on a PC.
– Single-SUN2000 networking
Figure 5-21 Single-SUN2000 networking
– Multi-SUN2000 networking
If multiple SUN2000s are used, connect all the SUN2000s with an RS485
cable in daisy chain mode.
SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual 5 Electrical Connections
Issue 11 (2024-02-02) Copyright © Huawei Technologies Co., Ltd. 59
To Next Page
Loading...
