Huawei SUN2000-8K-LC0 - 4 Installation; Installation Modes; Installation Requirements; Site Selection Requirements

4 Installation
4.1 Installation Modes
The inverter can be wall-mounted or support-mounted.
Table 4-1 Installation modes
Installation
Mode
Screw Specications Description
Wall
mounting
M6x60 stainless steel expansion bolt Delivered with
the product
Support
mounting
M6 bolt assembly Prepared by the
customer
4.2 Installation Requirements
4.2.1 Site Selection Requirements
Basic Requirements
● The inverter is protected to IP66 and can be installed indoors or outdoors.
● Do not install the inverter in a place where personnel are easy to come into
contact with its enclosure and heat sink, because these parts are hot during
operation.
● Do not install the inverter in noise-sensitive areas.
● Do not install the inverter near ammable or explosive materials.
● Keep the inverter out of reach of children.
● The inverter will be corroded in salt areas, and the salt corrosion may cause
re. Do not install the inverter outdoors in salt areas. A salt-aected area
SUN2000-(8K, 10K)-LC0 Series
User Manual 4 Installation
Issue 01 (2023-09-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 24