● Prepare an anti-theft lock suitable for the lock hole diameter (Ф10 mm).
● An outdoor waterproof lock is recommended.
● Keep the key to the anti-theft lock.
Figure 4-11 Installing an anti-theft lock
----End
4.7 Installing the Inverter on a Support
Step 1 Determine the positions for drilling holes using the marking-o template, and
then mark the positions with a marker.
Figure 4-12 Determining hole positions
SUN2000-(8K, 10K)-LC0 Series
User Manual 4 Installation
Issue 01 (2023-09-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 33
To Next Page
Loading...
