Figure 5-13 Assembling a DC connector
----End
Removing a DC connector
Before removing the positive and negative connectors, ensure that the DC
SWITCH is OFF.
To remove the positive and negative connectors from the SUN2000, insert an
open-end wrench into the notch and press hard to remove the DC connector.
Figure 5-14 Removing a DC connector
SUN2000-(8KTL-20KTL)-M2
User Manual 5 Electrical Connections
Issue 11 (2023-02-07) Copyright © Huawei Technologies Co., Ltd. 51
To Next Page
Loading...
