Figure 2-24 Riser card 1 (three x8 slots) (Board No.: BC82PRUA)
● The riser card shown in Figure 2-25 supports full-height full-length dual-
width GPUs. It provides PCIe slots 2 and 3 when installed in I/O module 1 and
PCIe slots 5 and 6 when installed in I/O module 2.
● Use the GPU power cable delivered with the server.
● Only slots 2 and 5 support full-height full-length dual-width GPUs.
Figure 2-25 Riser card 2 (one x8 slot + one x16 slot) (Board No.: BC82PRUB)
● The riser card shown in Figure 2-26 is required for I/O module 1 or 2 in a
server with 8 x 2.5-inch SAS/SATA drives and 12 x 2.5-inch NVMe SSDs. Ports
A, B, and C are Slimline cable connectors.
TaiShan 200 Server (Model 2280)
User Guide 2 Components
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 26
To Next Page
Loading...
