Huawei TaiShan 200 23280 - Page 83

NO TE
● The default iBMC user account is Administrator.
● U-boot is a piece of underlying software used to congure basic settings, for example,
initializing hardware devices and setting up memory space mapping, to prepare for
commissioning the OS.
● To ensure system security, change your initial password at your
rst login and change
the password periodically.
● A simple password is easy to crack, which makes the system vulnerable. You are advised
to use a password that meets complexity requirements or to enable the password
complexity check function.
● The password complexity check function is enabled by default.
You can change an iBMC user password on the iBMC WebUI or CLI. The following
describes how to change a user password on the iBMC WebUI. For details about
operations on the iBMC CLI, see the TaiShan Rack Server iBMC User Guide .
Changing the Initial Password of the Default iBMC User
Step 1 Log in to the iBMC WebUI and open the Local User page.
● If the iBMC version is V549 or earlier, choose
Conguration > Local Users.
The page shown in Figure 5-31 is displayed.
Figure 5-31 Local Users page (iBMC V549 or earlier)
● If the iBMC version is V561 or later, choose User & Security > Local Users.
The page shown in Figure 5-32 is displayed.
Figure 5-32 Local Users page (iBMC V561 or later)
Step 2 Modify user information.
● If the iBMC version is V549 or earlier, locate the user and click . The page
shown in Figure 5-33 is displayed.
TaiShan 200 Server (Model 2280)
User Guide 5 Installation and Conguration
Issue 09 (2021-01-12) Copyright © Huawei Technologies Co., Ltd. 75