Huawei TE30 - Setting SIP Parameters

14
Huawei GK
Whether to enable the Huawei GK.
If the Huawei GK is disabled, some
functions, such as Conference Control,
are unavailable on the TE30.
By default, this parameter is
deselected.
Retain the default setting if your
TE30 is interoperating with
endpoints from other suppliers.
Setting SIP Parameters
Click Next. On the screen shown on
the left, set SIP parameters.
Parameter
Description
Setting
Register with
server
Whether to register with the SIP server.

If you select this parameter, the TE30
registers with the SIP server. After
successfully registering with the SIP
server, the TE30 can call endpoints
defined in the address book by their
IP addresses, numbers, and names.

If you do not select this parameter,
the TE30 does not register with the
SIP server and can call other
endpoints only by their IP addresses.
By default, this parameter is
deselected.
Server address
IP address or domain name of the SIP
server with which you want the endpoint
to register.
If you set this parameter to the domain
name of the SIP server, enable the
domain name server (DNS). If the DNS
cannot be enabled, select Enable proxy
server.
No default value is set for this
parameter.
Obtain this user name from
your network service
provider.
Site number
Site number for the TE30.
The site number can contain