Figure 6-3 Home page of the web interface
6.4 Log Management
Operation and error logs are recorded for the endpoint, helping users maintain the system and
locate faults.
Logs are saved as files in the endpoint. Users can query historical logs either on the web
interface or using the remote control. Querying logs of the specified date is supported. Using
the web interface, users can export logs as files to the local PC for detailed analysis, or delete
all historical logs. If you use the touch panel, you can query its logs.
6.5 Inspection
l The SMC can automatically perform the following inspection tasks on the endpoint:
– Check the status of IP lines.
– Check the system software version, CPU, memory, temperature, and fan.
– Check the H.323 and SIP registration status.
– Check the connection status of the built-in camera and the working status of its
PTZ.
– Conduct a diagnosis on local audio and video loopback.
– Continue inspection after the endpoint restarts or ends a call.
– Stop inspection anytime.
– Receive the inspection status and result.
l The Versatile Tools Suite (VTS) collects the information about the network status,
system status, connection status, hardware running status, and faults of the endpoint.
6.6 CHR Collection
CHR collection is unsupported when the built-in MCU of the endpoint is functioning.
TE30 Videoconferencing Endpoint
Product Overview
6 Operation and Maintenance
Issue 03 (2018-06-30) Copyright © Huawei Technologies Co., Ltd. 31
To Next Page
Loading...
Need help?
General
