Huawei UA5000 - Page 61

Figure 5-5 Configuration process of the ESCM
Add the EMU
Start
End
Query the EMU status
Query the default monitoring
information
Query the environment
information
Confirm the environment
information
configure the environment
monitoring parameters
Table 5-9 Commands for configuring the ESCM
To...
Run the Command...
Add an EMU emu add
Query the EMU status display emu
Query the system configuration display esc system parameter
Query the environment
information
display esc environment info
Configure the analog parameters esc analog
IDs of user-defined alarms in the analog parameters: IDs
1-4 are reserved alarm IDs in the system (1: temperature;
2: humidity; 3: voltage; 4: current), and IDs 5-20 are
alarm IDs allocated to other user-defined alarms by
users.
UA5000 Universal Access Unit
Environment Monitoring 5 ESCM Monitoring Solution
Issue 01 (2012-08-17) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55