EasyManua.ls Logo

Huawei WA603DE - User Manual

Huawei WA603DE
37 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WA603DE & WA653DE
V100R003C03
Fat AP Configuration Guide
Issue 02
Date 2012-04-19
Huawei Technologies Co., Ltd.

Table of Contents

Questions and Answers

  • M
    markhallAug 1, 2025
    What to do if a STA cannot access the network on a Huawei WA603DE?
    • B
      Bradley LeAug 1, 2025
      If a STA cannot access the network, verify that the AP and the STA are configured with the same SSID. Also, ensure that the authentication or encryption function is enabled and the STA is configured with the corresponding authentication mode and the encryption key. If using 802.1x authentication, confirm that the 802.1x client software is installed and correctly configured on the STA. If the STA roams between APs, ensure that the involved APs and wireless devices are in the same ESS and share the same SSID and authentication mode.
  • L
    lance95Aug 15, 2025
    How to troubleshoot PC unable to manage Huawei Wireless Access Point in Telnet or Web mode?
    • R
      Robert MorganAug 15, 2025
      If a PC cannot manage an AP in Telnet or Web mode, ensure the following: * The IP address, subnet mask, and default gateway of the AP are valid. * If VLAN is enabled on the AP, packets sent from the PC must have the same VLAN ID as the AP. * When an AP is managed by a STA, the AP management and control function must be enabled. * The AP is connected to a valid wireless network. * If the PC is connected through Ethernet, the connection between the AP and the PC is correct. * If the PC is connected in wireless mode, the wireless connection is valid. * Check if the number of Telnet connections exceeds the maximum; if so, try again later.

Summary

System Overview

Fit;Fat Switchover

Instructions for switching the AP between Fit and Fat modes.

Basic Configuration

Configure Computer for AP Access

Web Interface Login

Common Wireless Parameter Configuration

Specific Wireless Parameter Configuration

Service Configuration

Device and User-Specific Settings

Configuring device name, location, and administrative login details.

Change Admin Username and Password

Static IP Address Configuration

Steps to assign a fixed IP address to the AP.

WLAN Configuration

Comprehensive settings for wireless local area networks.

Access Control and MAC Filtering

Encryption Mode and Security Settings

Configuring WPA/WPA2 versions, algorithms, and passphrases.

802.1 X Authentication Setup

Upgrade and Maintenance

Firmware Upgrade Procedures

Guides for updating AP firmware via FTP, TFTP, or Web interface.

AP Reboot and Restart

Factory Reset and Defaults

Restoring the AP to its original factory default settings.

Troubleshooting Common Issues

STA Cannot Access Network

Solutions for when a wireless station cannot connect to the network.

PC Cannot Manage AP

Troubleshooting for issues accessing AP management via Telnet/Web.

AP Login Failure Resolution

Huawei WA603DE Specifications

General IconGeneral
ModelWA603DE
TypeWireless Access Point
Operating Temperature-10°C to +50°C
Storage Temperature-40°C to +70°C
Operating Humidity5% to 95% (non-condensing)
Wireless Standards802.11a/b/g/n/ac
Frequency Bands2.4 GHz, 5 GHz
Power SupplyPoE (802.3at)
Antenna TypeInternal
Maximum Transmit Power20 dBm

Related product manuals