WA603DE & WA653DE
Fat AP Configuration Guide 4 Upgrade and Maintenance
Issue 02 (2012-04-19) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
24
Figure 4-3 Restarting the AP
2. Click Reboot Now.
You are automatically logged out of the AP.
3. Several minutes later, if you can log in to the AP, the AP is successfully restarted.
----End
4.3 Restoring the Factory Default Settings
z
When an AP is connected to a computer and configured with the Wi-Fi function, do not
restore the AP's factory default settings unless you are assisted by Huawei technical
support engineers or network administrators.
z
Restoring the AP's factory default settings in Web mode will remove all the current
settings of the AP and disconnect the AP from the wireless network.
To restore the AP's factory default settings, proceed as follows:
1. Choose Maintenance > Reboot/Reset from the left navigation tree.
The page shown in Figure 4-4 is displayed.
To Next Page
Loading...
