WA603DE & WA653DE
Fat AP Configuration Guide 2 Basic Configuration
Issue 02 (2012-04-19) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
6
Parameter Description
Protection Mode Whether to control when an 802.11 device can communicate with
other devices.
If a protection mode is enabled, the interaction between 802.11b
and 802.11g devices is enhanced while the network performance
may be affected. The options are as follows:
z
Disabled: no protection mode is used.
z
CTS-only: If this option is selected, all the destination devices
are forced to receive data when the AP sends data out.
z
RTS-CTS: If this option is selected, the data sending and
receiving devices are forced to confirm data exchange after a
data transmission event is completed and before another
transmission event occurs.
Here, CTS is short for Clear To Send and RTS is short for Request
To Send.
4. Click Update Settings to save the settings.
----End
2.3.2 Configuring Specific Wireless Parameters
1. Click a Wireless # tab page, as shown in Figure 2-4.
The symbol # represents 1 to 8 for a single-frequency AP and 1 to 16 for a dual-frequency AP.
Figure 2-4 Configuring specific wireless parameters
2. (Optional) Select Enabled for Wireless Availability and Broadcast SSID.
3. Enter a wireless network name in the SSID field to identify the wireless network. For
example, huawei Wireless AP.
To Next Page
Loading...
