WA603DE & WA653DE
Fat AP Configuration Guide 4 Upgrade and Maintenance
Issue 02 (2012-04-19) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
21
4 Upgrade and Maintenance
4.1 Upgrading the Firmware
You can upgrade the firmware in either of the following ways:
z
FTP: features high reliability and a long upgrade duration, and requires ID
authentication.
z
TFTP: features low reliability and a short upgrade duration, and does not require ID
authentication.
z
Web: features a short upgrade duration and requires a connection to the Internet.
After upgrade, you need to manually restart to the AP to make the upgrade takes effect.
Upgrade in FTP or TFTP Mode
1. Obtain the IP address of the FTP or TFTP server. To upgrade in TFTP mode, run the TFTP
server application on the PC and set the transmission path. To upgrade in FTP mode, set the
transmission path, user name, and password.
2. Choose Maintenance > Upgrade from the left navigation tree. The page shown in Figure 4-1
is displayed.
To Next Page
Loading...
