WA603DE & WA653DE
Fat AP Configuration Guide 4 Upgrade and Maintenance
Issue 02 (2012-04-19) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
22
Figure 4-1 Selecting the FTP mode
3. Set the parameters according to Table 4-1, and click Perform Upgrade. If you do not want to
upgrade, click Save parameters only.
Table 4-1 Parameters for the upgrade in FTP mode
Parameter Description
Firmware Server IP address of the TFTP or FTP server.
Port Port number of the FTP or TFTP server. Retain the default setting.
By default, the port number is 21 for FTP and 69 for TFTP.
Image Control File Name of the firmware to be upgraded.
Username User name used to log in to the FTP server.
Password Password used to log in to the FTP server.
4. Restart the AP after the upgrade.
----End
Upgrade in Web Mode
1. Choose Maintenance > Upgrade from the left navigation tree, and select Web, as shown in
Figure 4-2.
To Next Page
Loading...
