Huawei V200R001C01 - 7 IP Forwarding and Routing

Procedure
Step 1 Check that the service configuration is correct.
Run the following command to check the service right of the user.
<Huawei> display voice service-right 68780000
Dialno name : 28781001
CLIP : Disable
CLIR : Disable
CFU : Enable
CFB : Disable
CFNA : Disable
CFS : Disable
CFO : Disable
CW : Enable
Call limit : Disable
Call transfer : Enable
Call hold : Disable
Call back : Disable
Three party : Enable
Conf : Disable
Call insert : Disable
Call redial : Disable
Query dn : Enable
DND : Enable
Abbdial : Disable
Wake call : Enable
Roam : Disable
Pickup in group : Disable
Pickup special : Enable
Ring service : Disable
SCA : Disable
RCS : Enable
RAC : Disable
Overstep CLIR : Disable
Call intercept : Enable
Remote office : Disable
Scc cancel : Disable
SCR : Disable
Park : Disable
DLC : Disable
Ciphercall : Disable
Ciphercall limit : Disable
CRBT : Disable
OCM : Disable
ICM : Disable
CCBS : Disable
CCNR : Disable
CR : Disable
In the command output, Clip indicates the Calling Line Identification Presentation (CLIP)
service, clir indicates the Calling Line Identification Restriction (CLIR) service, and Disclir
indicates the Identification Restriction Override (RIO) service.
Run the following command in the user identifier view to enable the CLIP service:
[Huawei-voice-dialno-68780000] service-right clip enable
If the CLIR service is enabled for the calling party, enable the RIO service for the called party.
[Huawei-voice-dialno-68780000] service-right overstepclir enable
l If the service configuration is incorrect, modify the configuration.
l If the service configuration is correct, go to Step 2.
Step 2 Check whether there is electromagnetic interference and whether the subscriber line is working
properly.
Huawei AR2200-S Series Enterprise Routers
Troubleshooting 6 Voice
Issue 01 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
153