EasyManua.ls Logo

Huawei V200R001C01 - Page 73

Huawei V200R001C01
391 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAC Address VLAN/Bridge Learned-From Type
-------------------------------------------------------------------------------
0025-9e80-2494 1/- Eth 2/0/1 dynamic
-------------------------------------------------------------------------------
Total items displayed = 1
If not, re-configure the binding relationships between the MAC address, VLAN, and interface.
If so, go to Step 2.
Step 2 Check whether a loop on the network causes MAC address flapping.
If a loop exists on the network, use either of the following methods to prevent MAC address
flapping:
l Remove the loop from the network.
l Run the loop-detect eth-loop command in the VLAN view to enable the MAC flapping
detection function. The AR2200-S checks whether a MAC address moves from one
interface to another in the VLAN. If MAC address flapping occurs, the AR2200-S blocks
the interface or MAC address.
If no loop exists, go to Step 3.
Step 3 Check that MAC address learning is enabled.
Check whether MAC address learning is enabled in the interface view and the VLAN view.
[Huawei-Ethernet2/0/1] display this
#
interface Ethernet2/0/1
mac-address learning disable
port hybrid tagged vlan 10
undo negotiation auto
#
return
[Huawei-vlan10] display this
#
vlan 10
mac-address learning disable
#
return
If the command output contains mac-address learning disable, MAC address learning is
disabled on the interface or VLAN.
l If MAC address learning is disabled, run the undo mac-address learning disable
command in the interface view or VLAN view to enable MAC address learning.
l If MAC address learning is enabled on the interface, go to Step 4.
Step 4 Check whether any blackhole MAC address entry or MAC address limiting is configured.
If a blackhole MAC address entry or MAC address limiting is configured, the interface discards
packets.
1. Run the display mac-address blackhole command to check whether any blackhole MAC
address entry is configured.
[Huawei] display mac-address
blackhole
M-----------------------------------------------------------------------------
--
MAC Address VLAN/Bridge Learned-From
Type
------------------------------------------------------------------------------
Huawei AR2200-S Series Enterprise Routers
Troubleshooting 4 LAN
Issue 01 (2012-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64

Table of Contents

Related product manuals