WA603DE & WA653DE
Fat AP Configuration Guide 3 Service Configuration
Issue 02 (2012-04-19) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
11
Figure 3-4 Specifying the IP address
2. Click Static IP in the Connection Type field and set the static IP address, as shown in Figure
3-5.
Figure 3-5 Setting the static IP address
If the DHCP server is unavailable or the AP fails to obtain an IP address from the DHCP server, the AP
uses the default IP address, 192.168.0.1.
3. Click Update Settings to save the settings.
----End
Operation Result
Choose Configuration > Internet from the left navigation tree. The updated settings are
displayed, as shown in Figure 3-6.
You can click Enable Auto-update to enable the function of automatically updating IP
settings.
To Next Page
Loading...
