18
CHAPTER 3: USING PRODIGI SOFTWARE
INITIALIZING THE CONNECT 12 TABLET
To access detailed videos of the tablet initialization process, visit HumanWare’s
Connect 12 support page (www.humanware.com/connectsupport) or
HumanWare’s YouTube channel.
Note: The Connect 12 tablet must be initialized through the Android set-up
wizard before Prodigi software can be used. The process is like setting up any
new personal computing device, so be prepared with Wi-Fi and network
passwords as well as Google account information. It is recommended to
associate both Wi-Fi and Google accounts during this process.
Some steps in this process will take a few minutes.
Upon completion of the Android wizard, you will be prompted to install Prodigi
software, simply follow the onscreen prompts.
Once Prodigi software is installed, the system will check for updates, then you
will be prompted to choose and install a voice or several voices (four voices,
maximum).
Finally, you will be prompted to choose your Home application. In most cases,
we recommend Prodigi software.
THE ICON BANNER
Most of Prodigi’s features are accessed via the Icon banner located at the base
of the screen.
Tap the Open Banner icon (refer to image 16) or swipe upward to display the
Icon banner.
To Next Page
Loading...